Книга на английском языке
The structural strength criteria in the ABS Rules for Building and Classing Marine Vessels (Marine Vessel Rules) are the basis to establish the required scantlings for vessels classed by ABS. For vessels carrying ore cargoes, Part 5C, Chapter 3 of the Marine Vessel Rules is applicable to the vessel configurations for ore carriers and ore/oil carriers. The hull structure is required to be evaluated against the failure modes of yielding, buckling, and fatigue under the design loads in the Marine Vessel Rules.
Contents
Section 1 Introduction
1 General
3 Application
5 Notations
Section 2 Requirements for LDCARE1 and LDCARE2
1 Evaluation Requirement for LDCARE1
3 Evaluation Requirement for LDCARE2
Section 3 Requirements for TML
1 Iron Ore Fines That May Liquefy
3 Cargo Hold Structure
3.1 Initial Scantling Criteria
3.3 Total Strength Assessment
5 Stability
5.1 Intact Stability
5.3 Damage Stability
Figure 1
Figure 2
Section 4 Surveys
1 Surveys During Construction/Initial Survey
3 Surveys After Construction
3.1 Annual Surveys
3.3 Special Periodical Surveys