Rules for Building and Classing Marine Vessels. Part 3. Hull Construction and Equipment/Правила постройки и классификации морских судов. Часть 3. Конструкция корпуса и оборудование

Книга на английском языке.
To use these Rules, the following are to be met:
The requirements of the Rules apply to vessels of all welded construction.
For vessels with riveted hull construction, the applicable sections in the 1969 edition of the Rules are to be complied with.
The design temperatures for unrestricted service are assumed to be not less than -10°C (14°F) for air temperature and not less than 0°C (32°F) for sea water temperature.
These Rules are intended for vessels of welded construction using steels complying with the requirements of Chapter 1 of the ABS Rules for Materials and Welding (Part 2).

Contents
Chapter 1 General
Section 1 Definitions
Section 2 General Requirements
Chapter 2 Hull Structures and Arrangements
Section 1 Longitudinal Strength
Section 2 Shell Plating
Section 3 Decks
Section 4 Bottom Structures
Section 5 Frames
Section 6 Web Frames and Side Stringers
Section 7 Beams and Longitudinals
Section 8 Pillars, Deck Girders and Transverses
Section 9 Watertight Bulkheads and Doors
Section 10 Deep Tanks
Section 11 Superstructures, Deckhouses and Helicopter Decks
Section 12 Machinery Space and Tunnel
Section 13 Stems, Stern Frames, Rudder Horns, and Propeller Nozzles
Section 14 Rudders and Steering Equipment
Section 15 Protection of Deck Openings
Section 16 Protection of Shell Openings
Section 17 Bulwarks, Rails, Freeing Ports, Portlights, Ventilators, Tank Vents and Overflows
Section 18 Ceiling, Sparring, and Protection of Steel
Section 19 Weld Design
Section 20 Guidance on Finite Element Analysis
Appendix 1 Calculation of Shear Stresses for Vessels Having Longitudinal Bulkheads
Appendix 2 Loading Manuals and Loading Instruments
Appendix 3 Loading Manuals and Loading Instruments:
Additional Requirements for Bulk Carriers, Ore
Carriers and Combination Carriers 150 Meters (492 Feet) and above in Length (Lf)
Appendix 4 Buckling Strength of Longitudinal Strength Members for Vessels Over 61 m (200 ft) in Length
Appendix 5 Guidelines for Calculating Bending Moment and Shear Force in Rudders and Rudder Stocks
Appendix 6 Portable Beams and Hatch Cover Stiffeners of Variable Cross Section
Appendix 7 Ice Operations
Appendix 8 Review of Temporary Industrial Equipment and Modules
Chapter 3 Subdivision and Stability
Section 1 General Requirements
Appendix 1 Intact Stability of Tankers During Liquid Transfer Operations
Appendix 2 Intact Stability Requirements for Offshore Support Vessels
Appendix 3 Intact Stability Requirements for Fishing Vessels
Appendix 4 Subdivision and Damage Stability Requirements for Bulk Carriers
Appendix 5 Damage Stability Requirements for Offshore Supply Vessels
Appendix 6 Damage Stability Requirements for Fishing Vessels
Appendix 7 Computer Software for Onboard Stability Calculations
Chapter 4 Fire Safety Measures
Section 1 Structural Fire Protection
Appendix 1 Fiber Reinforced Plastic (FRP) Gratings
Chapter 5 Equipment
Section 1 Anchoring, Mooring, and Towing Equipment
Section 2 Mooring of Vessels at Single Point Moorings
Section 3 Equipment without symbol
Chapter 6 Navigation
Section 1 Visibility
Chapter 7 Testing, Trials and Surveys During Construction - Hull
Section 1 Tank, Bulkhead and Rudder Tightness Testing
Section 2 Trials
Section 3 Surveys