Design in Maritime Engineering/Проектирование морской техники

Книга на английском языке.
Common engineering materials reach in many applications their limits and new developments are required to fulfil increasing demands on engineering materials.
The performance of materials can be increased by combining different materials to achieve better properties than a single constituent or by shaping the material or constituents in a specific structure. The interaction between material and structure may arise on different length scales, such as micro-, meso- or macroscale, and offers possible applications in quite diverse fields.

Contents
1 Review of the Current Trends on Autonomous Vehicles in Developing Countries
2 Review of Current Trends in Marine Energy: Large Tidal Current Turbines
3 The Review of National Contingency Plan Towards the Oil Spill Response in Malaysia
4 Simulation of Three-point Bending Sandwich Composite Panels Through Finite Element Analysis
5 The Application of Unmanned Aerial Vehicles (UAV) for Slope Mapping with the Determination of Potential Slope Hazards
6 Tensile Strength Testing of +45° Isotropic FRP Laminate on Different Universal Testing Machines
7 Instruments Utilized in Short Sea Shipping Research: A Review
8 Issues on Palm Oil Shipment with Regard to the Revised MARPOL Annex II: A Review
9 Assessing the Efficacy of the Advance Transfer Technique in Calculating the Wheel Over Point Through Simulation Studies
10 Polysulfone/Cellulose Acetate Phthalate/Polyvinylpyrrolidone (PSf/CAP/PVP) Blend Membranes: Effect of Evaporation Time on Blend Membrane Characteristics
11 Influence of Deadrise on the Dynamic Instability of a 14 Meters Custom Boat in Regular Waves
12 The Implication of the Container Floating Terminal on the Efficiency of Port Klang’s Terminal Operations and Domestic Freight Forwarding Industry
13 The Optical Properties of Polyvinyl Alcohol (PVA), Phosphorylated Polyvinyl Alcohol (PPVA), and Phosphorylated Polyvinyl Alcohol-Aluminum Phosphate (PPVA-AlPO4) Nanocomposites: Effect of Phosphate Groups
14 Tensile and Corrosion Resistance Studies of MXenes/Nanocomposites: A Review
15 Effect of Nanofillers on the Mechanical Properties of Epoxy Nanocomposites
16 The Degradation ofMechanical Properties Caused by Acetone Chemical Treatment on 3D-Printed PLA-Carbon Fibre Composites
17 Tensile and Morphology Analysis of Oil Palm Trunk Specimen Reinforced Epoxy Fabricated via Vacuum-Assisted Resin Transfer Moulding
18 The Analysis of Container Terminal Throughput Using ARIMA and SARIMA
19 Investigation on the Mechanical and Microstructural Characteristics of Diffusional Bonded Gray Cast Iron and Low Carbon Steel
20 Ergonomic Dynamic Examination Table Innovation Using the Anthropometric Approach and Rational Methods
21 The Effect of Corrosion Depth on the Ultimate Strength of an Aging Fixed Offshore Structure
22 An Assessment of Mechanical Properties on Self-Cleaning Concrete Incorporating Rutile Titanium Dioxide
23 Blockchain Interoperability: Connecting Supply Chains Towards Mass Adoption
24 Fire Safety Compliance Amongst Foreign Ships in Malaysian Ports: An Evaluation Using the Flag of Convenience Likelihood Method
25 The Retardation Process of Crack Propagation in Unconfined High-Strength Concrete Columns Due to the Introduction of Silica Fume
26 Interpretations of Maritime Experts on the Sustainability of Maritime Education: Reducing the Lacuna
of Amalgamation Between Maritime Education and Industries
27 The Effect of Process Temperature and Holding Time on Weldability in DiffusionWelding of Duplex Stainless Steels and Marine Grade Steels for Oil and Gas Pipes
28 Development of a Floating Solar Platform for River Application
29 A Review on the Potential Applications of the Ketapang Tree in Different Areas (Terminalia Catappa)
30 A Review on Contactless Power Transfer Using Matrix Converter Topology for Battery Charging Application 31 Fatigue and Drowsiness Detection System Using Artificial Intelligence Technique for Car Drivers
32 Development of an International Framework for Private Maritime Security Companies in Malaysia
33 Development of Floating Buoy Technology Using a Modular Method
34 Numerical Simulation of Heat Generation During Plunging Stage in Orbital Friction Stir Welding on Pipe Aluminum Alloys AA6061-T6 Adapting a Pure Lagrangian Formulation